Release Management
Space shortcuts
Space Tools
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 49 Next »

1.7.13 Release Notes


Highlight of Features

Frontend

The Webclient configuration file has changed!

 

When upgrading to the v1.7.13 webclient, you will notice that i2b2_config_data.js has been renamed to i2b2_config_data.json. Your old configuration will still work with this new file name, but you will need to:

  • remove all comments from the file (lines that begin with //).
  • Escape slashes (e.g., / becomes \/)

There are also new optional parameters, documented below and in 1.4.2 Domain Configuration.

User Registration Tool

TODO

registrationMethodYString

NEW 1.7.13! Defines an information source for the new user registration tool. (If showRegistration is true, this parameter must be present.)

  • "SAML" = The tool will register users based on SAML EPPNs.
  • Any other value = The tool will register users with information entered in the registration form that pops up.

Community-Contributed Features

Contribution

Contributor


SAML Authentication

Kevin Bui
Michelle Morris
University of Pittsburgh

Justin Prosser
University of Washington

Mike Mendis
Jeff Klann
Reeta Metta
Mass General Brigham

i2b2 now includes support for SAML-based enterprise authentication via an institutional Identity Provider. See more information below.


Ability to specify user parameter defaults

Michael Horvath
Wake Forest University

This change is meant to allowing user params to take precedence over hive params. Currently, it's the other way around.

Particularly, if you have the situation where you have a large number of users who use an authentication method other than the default basic, but your service account (AGG_SERVICE_ACCOUNT) is using basic then you need to specify a user param for each of your users.

With this change, you can set default authentication params in pm_hive_params for all users, and then set your service account specifically to be authentication_method = 'BASIC'. May seem like a small change, but it would be very welcome not to need to assign params for each new user at our institution.

In the process of making this change, I re-organized basic authentication into its own package and removed some code duplication.

LDAP UPN Support

Michael Horvath

Wake Forest

Active Directory enables other methods of binding which are more flexible besides just using the distinguished name. https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-adts/6a5891b8-928e-4b75-a4a5-0e3b77eaca52. This change is to enable binding the the User Principle Name form, which is very convenient when the distinguished names for users is not easily available (OU by department, etc.).

API to get all children of an ontology node

Kevin Bui
Michelle Morris
University of Pittsburgh

The metadata GetChildren API call, which returns information on the children of an ontology node, can now be configured to return multiple levels of children (e.g., children, children's children, etc.). This is done by specifying the numLevel parameters. 

By default, the function assumes numLevel = 1 and will return the direct descendants of the concept, which is one level of children.  When the numLevel = -1 the function will return ALL descendants of the concept, otherwise the function will return up to and including the number of levels specified by numLevel (eg. numlevel=2 returns two levels of descendants, numLevel=4 returns four levels of descendants).

Totalnum Counter Performance ImprovementsDarren Henderson
University of Kentucky
Performance enhancements on SQL Server totalnum counting to not unnecessarily recompute temp tables.


Backend Features

SAML Authentication

(LINKS DON'T WORK AND DOCUMENTATION IS INCOMPLETE.)

i2b2 now includes support for SAML-based enterprise authentication via an institutional Identity Provider. To configure this, you need to do the following:

Configure the webclient to use SAML:

loginType = "federated" see 1.4.2 Domain Configuration

configure SimpleSAMLPHP (now included with i2b2) to talk to your institution's Identity Provider. To set up SAML:

We will use SimpleSAMLphp for IdP. Place the following files to the folder /etc/shibboleth/:

If you would like to use your own IdP, please visit Configuration - Service Provider 3 - Shibboleth Wiki for advance configurations.

Place the following files in the directory /etc/httpd/conf.d/:

1) Setting up Apache and simplesamlphp: https://simplesamlphp.org/docs/latest/simplesamlphp-install.html

2) Configure the service provider and add an identity provider: https://simplesamlphp.org/docs/latest/simplesamlphp-sp.html

(You will need to generate a cert in /var/www/simplesamlphp/metadata/saml20-idp-remote.php)

Improved Totalnum Scripts

Totalnum Scripts  have been updated to improve the Totalnum counter performance on both many ontology tables and very large(>1.5 million) ontologies  such as ACT medications. Debug messages have also been added for troubleshooting and profiling purposes

Totalnum Scripts Setup

  1. In the Release_1-7/NewInstall/Metadata/ run the ant script to create the stored procedures. 
    ant -f data_build.xml create_metadata_procedures_release_1-7 
  2. Run the stored procedures on your database. This can be done in two ways:
    1. Run the ant command to execute the data_build.xml file with below specified target 
      POSTGRESQL : ant -f data_build.xml db_metadata_run_total_count_postgresql
      ORACLE : ant -f data_build.xml db_metadata_run_total_count_oracle
      SQL SERVER : ant -f data_build.xml db_metadata_run_total_count_sqlserver   
    2. If using multiple fact tables, the recommended approach is to create a fact table view as the union of all your fact tables. (This is essentially going back to a single fact table, but it is only used for totalnum counting. This is needed to correctly count patients that mention multiple fact tables within a hierarchy.)
          e.g., 
             create view observation_fact_view as
             select * from CONDITION_VIEW 
             union all
             select * from drug_view
          And then run the totalnum counter with the wildcard flag, to ignore multifact references in the ontology
            e.g., in SQL Server, exec RunTotalnum 'observation_fact_view','dbo','@','Y'
          Note this approach does not work if you have conflicting concept_cds across fact tables.
    3. Execute the RunTotalNum  stored procedure manually against your database in from a sql Client. This can take several hours.  Example Usage:    

                                          Oracle:            
                                          begin
                                          RUNTOTALNUM('observation_fact','i2b2demodata');
                                          end;   

-- You can optionally include a table named if you only want to count one ontology table (this IS case sensitive):
--begin
--  runtotalnum('observation_fact','i2b2demodata','I2B2');
-- end;







                                          Note: If you get the error as: ERROR at line 1: ORA-01031: insufficient privilege, then run the command:
                                          grant create table to (DB USER)  
                                          SQL server:              
                                          exec RunTotalnum 'observation_fact','dbo','@' (the observation table name (for multi-fact-table setups), the schemaname, -- a single table name to run on a single ontology table, and a wildcard flag that will ignore multifact references in the ontology if 'Y')


                                          PostgreSQL:              
                                          select RUNTOTALNUM('observation_fact','public')
                                      – (replace 'public' by the schema name for the fact table)
                                      – If using a schema other than public for metadata, you might need to run "set search_path to 'i2b2metadata','public' " first as well
                                               

  1. When finished, verify it is complete by checking that c_totalnum columns in your ontology tables contain numbers (not nulls).

    These total counts will be visible in the ontology browser in the web client.

Additional New Stored Procedures

Age In Years Updater

When the metadata is installed via ant, a new SQL  db_metadata_load_data

ant -f data_build.xml 

TODO

Concept Dimension Updater

Insert_Concept_FROMTableAccess  is designed to populate concept_dimenison table using Table_access table records.
The stored procedure loops through the table_access  and  inserts values from corresponding c_table_name metadatatable which have 
c_tablename column value as 'concept_dimension'
Example usage: exec Insert_Concept_FROMTableAccess

I2b2-Synthea data Load

A new option is now available for loading Synthea data files into i2b2. Synthetic patient data generated by Synthea is hosted on  SyntheticMass..The Synthea sample files have been converted to i2b2-ACT format. The zipped data files can be downloaded from https://github.com/i2b2/i2b2-synthea
Synthea Load Process:

  1. Download SyntheticMass Data, Version 2 (24 May, 2017)
  • All data sets (1k, COVID 10k, COVID 100k) have been verified to work EXCEPT the 100k patients in the large SyntheticMass Version 2 download. This version needs an extra step to delete invalid records before import. (Details coming soon.)
  1. Set up an i2b2 project with the ACT ontology.
  2. Run create_synthea_table_<your dbServertype>.sql in your project to create the Synthea tables.
  3. Import the Synthea data you downloaded in step one into the Synthea tables in your project.
  4. Load the i2b2-to-SNOMED table in this repository into your project. https://www.nlm.nih.gov/healthit/snomedct/us_edition.html
    • Click on the "Download SNOMED-CT to ICD-10-CM Mapping Resources" link to download. (You will need a UMLS account.)
    • Unzip the file
    • Import the TSV file into a table called SNOMED_to_ICD10 in your database.
  5. Run synthea_to_i2b2_sqlserver.sql to convert synthea data into i2b2 tables (this will truncate your existing fact and dimension tables!)
    • Replace references to i2b2metadata.dbo in the script. Use the database and schema where your ACT ontology tables are.

ACT Version-4 Ontology data load

Metadata scripts are now available to load the latest ACT Version-4  Ontology into your i2b2 db schema

ACT4 data load process:

  • Download the newinstall  zip package from https://www.i2b2.org/software/download.html?d=452
  • Extract the  metadata\act folder from the downloaded zip folder
  • Replace edu.harvard.i2b2.data\Release_1-7\NewInstall\Metadata\act  folder with extracted new act folder
  • Edit the  db.properties file in your metadata folder  to update the project properties to 'ACT'db.project=ACT
  • From the edu.harvard.i2b2.data\Release_1-7\NewInstall\Metadata folder, run the ant command: ant -f data_build.xml db_metadata_load_data
  • This will execute the  SQL scripts form the edu.harvard.i2b2.data\Release_1-7\NewInstall\Metadata\act folder  to create the new ACT4 Ontology tables
  • and loads the corresponding metadata. 
  • You can now verify the new Ontology  by logging into the webclient.

The following command will load the corresponding concept_dimension data of the Onbtology tables  that will enable you to run queries in the webclient

From a sql Client>select 'insert into concept_dimension select c_dimcode AS concept_path, c_basecode AS concept_cd, c_name AS name_char, null AS concept_blob, update_date AS update_date, download_date as download_date, import_date as import_date, sourcesystem_cd as sourcesystem_cd, 1 as upload_id from '
+c_table_name+' where m_applied_path=''@'' and c_tablename=''CONCEPT_DIMENSION'' and c_columnname=''concept_path'' and c_visualattributes not like ''%I%'' and (c_columndatatype=''T'' or c_columndatatype=''N'') and c_synonym_cd = ''N'' and (m_exclusion_cd is null or m_exclusion_cd='''') and c_basecode is not null and c_basecode!='''''
from <your_dbschema>.dbo.TABLE_ACCESS where c_visualattributes like '%A%'

Security Enhancements

  • i2b2 has been made more secure by addressing parameterization and other potential vulnerabilities according to a Veracode scan.
  • Log4J has been upgraded to the latest version.

Improved db Upgrade Process

Currently i2b2 db upgrade is a multi-step process of running upgrade scripts and stored procedures. This release provides a set of upgrade scripts which will perform the complete db upgrade.

based on your current build version.

For example: Following Ant command will upgrade your db instance from 1.7.09c to latest version.

>ant -f data_build.xml upgrade_table_release_1-7-09c upgrade_table_release_1-7-10 upgrade_table_release_1-7-11 upgrade_table_release_1-7-12

Steps to Perform db upgrade:

  • Backup your existing data folder
  • Copy all the folders from the extracted download data folder   into your existing  data Upgrade folder
               Example:  Downloads\2b2core-upgrade-1712a\i2b2\data to C:\opt\edu.harvard.i2b2.data\Release_1-7\Upgrade\. This will replace
               existing Crcdata, Hivedata, Metadata, PMdata folders.
     Alternative to above step, navigate to the edu.harvard.i2b2.data\Release_1-7\Upgrade\   directory of your extracted folder
  • Copy the db.properties files from your back up into the respective locations(namely Crcdata, Hivedata, Metadata, PMdata )
  • Open the command prompt and navigate to  cell folders and run the following upgrade ant commands on your i2b2 database instance, where {db}      can  be Oracle, sqlserver or postgresql.
    Alternative to above Step, you can run individual SQL scripts on your db instance in place of  ant commands.

In  data folder\Release_1-7\Upgrade\  run the ant commands under each individual cell subfolder as below.

Upgrade From BuildUpgrade to Latest build

1.7.09c

In the Crcdata folder run the following ant command: ant -f data_build.xml upgrade_table_release_1-7-09c upgrade_table_release_1-7-10 upgrade_table_release_1-7-11 upgrade_table_release_1-7-12

In the Hivedata folder run the following ant command: ant -f data_build.xml upgrade_hive_tables_release_1-7-09c upgrade_hive_tables_release_1-7-10 upgrade_hive_tables_release_1-7-11 upgrade_hive_tables_release_1-7-12

In the Metadata folder run the following ant command: ant -f data_build.xml upgrade_tables_release_1-7-09c upgrade_tables_release_1-7-10 upgrade_tables_release_1-7-11 upgrade_tables_release_1-7-12

In the PMdata folder run the following ant command: ant -f data_build.xml upgrade_pm_tables_release_1-7-09c upgrade_pm_tables_release_1-7-10 upgrade_pm_tables_release_1-7-11 upgrade_pm_tables_release_1-7-12

1.7.10

In the Crcdata folder run the following ant command: ant -f data_build.xml upgrade_table_release_1-7-10 upgrade_table_release_1-7-11 upgrade_table_release_1-7-12

In the Hivedata folder run the following ant command: ant -f data_build.xml upgrade_hive_tables_release_1-7-10 upgrade_hive_tables_release_1-7-11 upgrade_hive_tables_release_1-7-12

In the Metadata folder run the following ant command: ant -f data_build.xml upgrade_tables_release_1-7-10 upgrade_tables_release_1-7-11 upgrade_tables_release_1-7-12

In the PMdata folder run the following ant command: ant -f data_build.xml upgrade_pm_tables_release_1-7-10 upgrade_pm_tables_release_1-7-11 upgrade_pm_tables_release_1-7-12

1.7.11


In the Crcdata folder run the following ant command: ant -f data_build.xml upgrade_table_release_1-7-11 upgrade_table_release_1-7-12

In the Hivedata folder run the following ant command: ant -f data_build.xml upgrade_hive_tables_release_1-7-11 upgrade_hive_tables_release_1-7-12

In the Metadata folder run the following ant command: ant -f data_build.xml upgrade_tables_release_1-7-11 upgrade_tables_release_1-7-12

In the PMdata folder run the following ant command: ant -f data_build.xml upgrade_pm_tables_release_1-7-11 upgrade_pm_tables_release_1-7-12

1.7.12

In the Crcdata folder run the following ant command: ant -f data_build.xml upgrade_table_release_1-7-12

In the Hivedata folder run the following ant command: ant -f data_build.xml upgrade_hive_tables_release_1-7-12

In the Metadata folder run the following ant command: ant -f data_build.xml upgrade_tables_release_1-7-12

In the PMdata folder run the following ant command: ant -f data_build.xml upgrade_pm_tables_release_1-7-12

Changelog

Database Drivers

The JDBC drivers were updated to the following versions.

Driver

ojdbc8.jar

postgresql-42.2.5.jar

mssql-jdbc-7.0.0.jre8.jar

New Version

Oracle 12.2.0.1

PostgreSQL 42.2.5

MS Sql Server 7.0.0

Supported Db Server versions

Server Type

SQL Server

Oracle

Postgres

Supported Version/s

2012+ (tested with up to 2019)

12g+ and 21c

9 to 14

Supported software versions

Application Type

Java

Wildfly

Apache HTD

Apache Ant

Apache Axis2

PHP

Supported Version/s

8 or 11

17.0.0

2.4.17 or higher

1.9.61.7.17.2.27 or higher

i2b2 Database Changes

New db updates 
  • DATA-7 QT_PATIENT_SET_ENC_COLLECTION should be a bigint (DONE)
  • DATA-5 Synthea i2b2 data (TO DO)
  • DATA-8 Synthea data load test from Github files (TO DO)
  • DATA-6 improve i2b2 db upgrade process (TO DO)
  • DATA-12  Stored procedure to update concept dimension (DONE)
  • DATA-11 Age in years updater during demodata install (TO DO)
  • DATA-9 ACT v4 ontology (TO DO)
  • CORE-389 Totalnum performance improvements (IN PROGRESS)
  • CORE-394 Obfuscated totalnum reporting tables (NEW)
  • CORE-398 Multifact support for totalnums  (NEW)
  • CORE-400 Show totalnums in top level folders (RESOLVED)

i2b2 Server and Client Changes

New Features and Improvements

Webclient Core-server
  • WEBCLIENT-334 Provide tabs for major plugins and temporal query (IN PROGRESS)
  • WEBCLIENT-344 Cleanup Analysis Tools list of Plugins to only Supported Items (NEW)
  • WEBCLIENT-325 Wayne's improvements to hierarchical find-by-name (IN PROGRESS)
  • WEBCLIENT-320 Provide REFRESH ALL context menu in FindTerms panel (NEW)
  • WEBCLIENT-307 Drag and drop in term info panel (NEW)
  • WEBCLIENT-306 Beth Israel contribution: commas in counts, query option infrastructure (REOPENED)
  • WEBCLIENT-343 Fix Veracode identified Security flaws in i2b2Webclient Code (NEW)
  • WEBCLIENT-353 SAML (client side) (NEW)
  • CORE-399 Oracle index hints must use the table alias (RESOLVED)
  • CORE-382 Username / password errors should not specify which had the problem (NEEDS VERIFICATION)
  • CORE-402 Fix Veracode identified Security flaws in i2b2 Server-Side Code (NEW)
  • CORE-404 Adding support for JDK 11. Now including the gensrc due to jaxb has been removed. (NEW)
  • CORE-413 FetchAllChildren (RESOLVED)
  • CORE-414 SAML (server side) (NEW)
  • CORE-415 Log4j upgraded to v2  (NEW)
  • CORE-416 User parameter precedence change (contributed by Michael Horvath) (RESOLVED)
  • CORE-417 LDAP UPN support (contributed by Michael Horvath) (RESOLVED)
  • CORE-419 i2b2 - redcap: ability to read from a file instead of from just a redcap api (NEW)


Bug Fixes

Webclient Core-server
  • WEBCLIENT-351 Obfuscated User Not Showing Graph (RESOLVED)
  • WEBCLIENT-342 switch response status check from "OK" to 200 to handle lab value pop up in http/2 protocols  (READY TO TEST)
  • WEBCLIENT-335 temporal query in webclient with no anchoring events not running (RESOLVED)
  • WEBCLIENT-350  Unable to drag items in workplace (NEW)
  • WEBCLIENT-325 Wayne's improvements to hierarchical find-by-name  (IN PROGRESS)
  • WEBCLIENT-341 Toggle between <and > group panel buttons resulting in blank QueryResults view  (NEW)
  • WEBCLIENT-319 FindTerms- exceeding more than 200(default) return count - displaying server error (NEW)
  • WEBCLIENT-316 Admin tool unresponsive in IE11 (NEW)
  • WEBCLIENT-305 Occasionally items in Find Terms by name are not draggable (OPEN)
  • WEBCLIENT-304 Hierarchical levels in Find Terms might not work in ontologies that have extra backslashes (NEW)
  • WEBCLIENT-294 Webclient Reports "QUERY CANCELLED" While Query Is Still Running (CLOSED)
  • WEBCLIENT-291 Date constraints popup OK button disabled, maintains new date if canceled (OPEN)
  • WEBCLIENT-196 Temporal query more than 2 events is not populating query name in the query name textbox and displaying new event added msg  (OPEN)
  • WEBCLIENT-156 switching from events grouppanel view to 'same financial encounter' selection is not switching to original concept group panel view (REOPENED)
  • CORE-418 Local timestamps in sessions on Oracle - appserver /db server in diff time zones (NEW)
  • CORE-282 Error returned when obfuscated user is locked out (OPEN)
  • CORE-281 Query continues to run after user receives lockout message (OPEN)
  • CORE-412 Disable login to agg service account  (RESOLVED)
  • CORE-405 Upgrade JDBC Drivers (NEW)
  • CORE-403 Add result path (NEW)
  • CORE-399 use alias for index hint  (RESOLVED)

Notes for Developers

For Java 11 install, if you change xsd, then modify the gensource.



  • No labels