Although this step of the installation is optional it is highly recommended that you do a "Sanity Check" to make sure the CRC Cell was installed correctly before installing another cell. There are basically two things we want to do to verify the installation.


1. Verify the web service is running

2. Log into the i2b2 web client and workbench to verify there are no errors with the CRC cell.


The second step of logging into the clients can only be done if you chose to install the web client and workbench after installing the i2b2 Admin Module. If you did not install them you can either skip this step or choose to install them now.



Verify Web Services

At this point in the installation process you want to do a quick check to make sure the Web Service for the CRC Cell is running.

Steps to verify web services


1. Open your web browser and enter the following URL:

http://yourHost:9090/i2b2/services/listServices



2. Verify the QueryToolService is listed as active.




Log into the Web Client and Workbench

The best "sanity check" you can do is to log into the i2b2 Web Client and Workbench. If there is a problem with the CRC cell you will see an error in the Query Tool and Previous Queries views.


The communication with the PM and other cells does differ slightly when logging into the two clients, which is why we recommend you log into both the Web Client and the Workbench.


Things to check:


Things to keep in mind:

Assuming you have been installing the cells in the order in which they appear in this installation guide you most likely have not installed the Workplace Cell yet. This means you will see valid errors in the Workplace view when you log into either one of the clients. On the other hand you have installed the PM, Ontology and CRC cells so you should not see any errors relating to these installations.


References for logging in and troubleshooting